Axial Bomber RR10 Servo Winch Plate
This is a servo winch plate for the Axialracing Bomber rr10 chassis.
Designed to mount in front of the battery. This plate allows the use of a servo winch.
Multiple mounting holes and ways to mount the different servo winches on the market.
Designed for a 31.5 mm eye to eye fairlead hawse to mount to the front for scale points.
most standard sized servo winches fit. (CBE, KMS)
- stainless plate.
- 2 10mm stainless screws
- 216mm stainless screws
- 2 lock nuts
- 4 spacers.
Here's the basic layout of how to install the rr10 bomber servo winch plate. You will need a 1/8" drill bit and basic tools.
Install the plate and install the 2 m3x10mm screws in the mounts under the battery tray. For the front 2 m3x16mm screws, mark and remove bumper. (Pencil shows up well on the black plastic)
Drill the two marked holes out. Re-install the bumper. With the m3x16mm spacers and m3 lock nuts, bolt the plate to the bumper.
DO NOT OVER TIGHTEN BOLTS!
***Spacers are only needed for those that are using the stock servo mount.***
Mount up you fairlead hawse and choice of servo winch.