For those that want to mount your electronics under the hood on your axial RR10 bomber here's the newest plate. Made from .063 aluminum light weight .7 oz with hardware.
2 3x10mm screws.
2 m3 nuts.
2 3x16mm screws.
4 plastic spacers.
RR10 Bomber aluminum electronics mount plate.
You will need a 1/8" drill bit and basic tools.
Install the plate and install the 2 m3x10mm screws and (2 spacers if needed) in the rear 2 holes under the battery . For the front 2 screws, mark holes and remove bumper. (Pencil shows up well on the black plastic)
Drill the two marked holes out. Re-install the bumper. With the m3x16mm screws (spacers if needed) and m3 lock nuts, bolt the plate to the bumper.
DO NOT OVER TIGHTEN BOLTS!